SUZUKI ALTO WORKS/TURBO RS
Strut Tower Bar
Strut Tower Bar
Strut Tower Bar

Strut Tower Bar

WORKS TURBO RS

Front body not only takes all the stress from the suspension through the strut upper bracket, it also holds the weight of Engine.
pedal touch feels more responsive and performance of the brake pdeal to hydrylic cylinder improves when installing this master cylinder stopper equipped tower bar.

Steel : JPY 18,000 (+tax)

Aluminum : JPY 24,000 (+tax)

スズキ アルト WORKS/ターボ用 メンバーブレースセット

Member Brace Set for 4WD

WORKS TURBO RS

Front body not only takes all the stress from the suspension through the strut upper bracket, it also holds the weight of Engine.
pedal touch feels more responsive and performance of the brake pdeal to hydrylic cylinder improves when installing this master cylinder stopper equipped tower bar.

JPY 18,900 (+tax)

スズキ アルト WORKS/ターボ用 ロワームバー フロント

Lower Arm Bar Front

WORKS TURBO RS

Lower arm bar is an undercarriage reinforcement part, which helps to get the best performance that suspensions can naturally offer.

JPY 11,000 (+tax)

スズキ アルト WORKS/ターボ用  メンバーブレース セット FF車専用

Member Brace Set

WORKS TURBO RS

Frame Brace connects front suspension member and first front vehicle frame. Its add rigidity of front overhang for better steering response and stability during cornering.

JPY 18,900 (+tax)

スズキ アルト WORKS/ターボ用 フレームブレース リア

Frame Brace Rear

WORKS TURBO RS

Weak point of the hatch-back type vehicle aft body has strengthened by installing this Rear Frame Brace.

JPY 13,500 (+tax)

スズキ アルト WORKS/ターボ用 フリップアップトーイングフック(フロント)

Flip Up Towing Hook Front

WORKS TURBO RS

This made of steel swivel tow hook installed on manufacture original tow hook hole. It is a good dress-up item to add competitive look to your vehicle.

JPY 17,800円 (+tax)

スズキ アルト WORKS/ターボ用 リア フック

Rear Hook

WORKS TURBO RS

It is a good dress-up item to add competitive look to your vehicle.

JPY 8,000円(+tax)

スズキ アルト WORKS/ターボ用 オイルキャッチタンク

Oil Catch Tank

WORKS TURBO RS

This Oil catch tank has same function as our general fitment oil catch tank with separator, level gage and drain bolts. For easy fitting with each model cars, we have catered bracket, pipe fitting location, angle, and hose length.

JPY 19,000円 (+tax)

スズキ アルト WORKS/ターボ用 パッセンジャープレート

Passenger Plate

WORKS TURBO RS

passenger plate is used to hold passenger with both foot in hard driving conditions.

Tuses 3mm thick aliminum. Easy installation with Velcro to your vehiclecarpet.

JPY 9,800円 (+tax)

スズキ アルト WORKS/ターボ用 ハイプレッシャーラジエターキャップ

High Pressure-Radiator Cap

WORKS TURBO RS

Carbing Radiator cap increases coolant pressure in order to raise coolant boiling point efficiency. This is the must item for cooling system tuning. Relief pressure 127kpa.

JPY 2,800円 (+tax)

スズキ アルト WORKS用 ロールバー

Rollbars

WORKS FF

Okuyama roll cage has ling of products with different number of points by adding angle and joints.

4P 50,000円(税抜)〜